I couldn't find any plans for an Ooni 16 pizza oven stand with dimensions so I created some to use myself and to share. I took the original design from a reddit post and changed the size and number of boards to save a little cost and added a recess cut-out for the propane tank. In the end it's a significant improvement over the saw horse and plywood version, but I prefer the stain color on the original design.
Material cost:
~ 68 board feet of 2x4's at $0.65/bf = $45
Screws = $15
Stain = $20
Total: $80
Hope someone finds this useful, please leave a comment if you did!
Before and after:
Plans:
Made one myself using your plans and it came out great. However I did notice you put qty 8 for item no 5 when you only need 7. Other than that it was solid
ReplyDeleteGlad it helped, thanks for taking the time to post! I've updated the item no 5 quantity from 8 to 7, good catch!
Delete